SONY / UWP-X7

This 800MHz Type-B standard wireless microphone package includes a bodypack transmitter and diversity tuner module, making it suitable for use in lectures and meetings at schools and companies. *The separately sold MB-X6 tuner base unit is required to use the UWP-X7.

*Not compatible with WRR-, WRT-, and SRP series wireless microphones. Also, using the same channel may result in interference.

■Transmitter
・Type: Bodypack transmitter (tie-clip microphone)
・Oscillation method: Crystal-controlled PLL synthesizer
・Transmitting antenna type:
1/4 wavelength λ wire antenna:
・Transmitting frequency: 806MHz-810MHz
・Antenna power: 10mW/2mW (selectable)

・Microphone type: Omnidirectional electret condenser type
・Signal-to-noise ratio: 60dB or greater
・Frequency deviation: ±5kHz
Distortion: Less than 1.0%
Frequency Response: 40-15kHz
Audio Attenuator: 0-21dB (3dB steps)
Tone Signal Frequency: 32kHz
Microphone Input: φ3.5mm mini jack

Display: Channel, frequency, audio level, RF level, accumulated usage time
Power Supply: DC 3.0V (2 AA alkaline batteries)
Battery Life: Approximately 10 hours
Operating Temperature: 0-+50°C
Storage Temperature: -20-+55°C
Dimensions (W x H x D): Approximately 63.0 x 8 2.5 x 18.7 mm (excluding antenna)
Weight: Approximately 145 g (including batteries)

■ Receiver

Type: Diversity tuner module
Reception method: Space diversity
Reception frequency: 806-810 MHz
Local oscillator: Crystal-controlled PLL synthesizer
Reference frequency deviation: ±5 kHz
Squelch level: 25 dBμ
Antenna type: Supplied by base unit
Frequency response: 40 Hz-15 kHz
Signal-to-noise ratio: 60 dB or greater
Distortion: Less than 1.0% (at 1 kHz modulation)
- Tone signal frequency: 32 kHz

- Display: Channel, frequency, audio level, RF level
- Power supply voltage: DC 9V (supplied from base unit)
- Operating temperature: 0-+50°C
- Storage temperature: -20-+55°C
- Dimensions: Approx. 57.0 x 26.0 x 121.0 mm (excluding antenna)
- Weight: Approx. 150 g (including batteries)
- Accessories: Unidirectional lavalier microphone (1), windscreen (1), holder clip (1), belt clip (1), instruction manual (1)