UNI-PEX / AA-300

Variations

This antenna is used with the WTS-322 and WTD-304. Depending on the mounting bracket used, it can be used for either wall installation or temporary installation on a microphone stand. To compensate for the loss of the coaxial cable, it has a built-in low-noise booster amplifier using a gallium arsenide FET.

■ Power Supply: DC12V
■ Current Consumption: Approximately 20mA
■ Antenna Type: 1/2 Wavelength Dipole Antenna
■ Receiving Frequency: 322.0MHz - 322.4MHz
■ Antenna Impedance: 75Ω
■ Booster Amplifier Gain: Approximately 10dB
■ Operating Temperature Range: 0°C - +40°C
■ Compatible Coaxial Cables: 3C-2V, 5C-2V, 5C-FB
■ Connection: BNC connector or screw
■ Exterior: Case (ABS resin): Off-white, Element (Stainless steel)
■ Dimensions: Total Length 440mm, Mounting Height 210mm
■ Weight: Approximately 0.2kg
■ Accessories:
・Wall Mounting Bracket x 1
・Microphone Stand Mounting Bracket (W5/16) x 1
・φ3 x 8 Tapping Screws x 4
・φ4 x 30 Wood Screws x 4
・Installation instructions (with warranty) 1