iConnectivity / PlayAUDIO2U Audio/MIDI Interface

<> iConnectivity / PlayAUDIO2U is a redundant audio/MIDI interface designed for touring and large stages. Featuring 24 channels of XLR output and advanced MIDI routing capabilities, it provides centralized control of your live performances in a single unit.

■Audio/MIDI Interface

A Versatile Audio/MIDI Interface Optimized for Live Performances
The PlayAUDIO2U is a full-featured, all-in-one audio/MIDI interface packed with features in a rugged, tour-grade enclosure. Inheriting the fail-safe functionality for audio track playback that was so well-received in the PlayAUDIO12 and PlayAUDIO1U, it features enhanced audio input/output, MIDI input/output, MIDI control, and RTP MIDI functionality. It enables audio input at live performances and events, multi-track playback from Mac/PC, virtual instrument performance, and MIDI connectivity. The PlayAUDIO2U is an all-in-one solution that integrates all the functions necessary for computer-based system operation into a single unit.

Audio Input Designed for Live Performances
The PlayAUDIO2U provides high-quality audio input designed for the stage, capturing details clearly with a wide dynamic range while maintaining silence in standby mode. Four XLR/1/4-inch TRS combo inputs feature high-quality microphone preamps and 48V phantom power, capturing vocals and instruments clearly without coloration or degradation. It seamlessly processes voice and instrument sounds, sending them to a redundant performance computer with minimal latency.

For Professionals Who Demand High Output
The PlayAUDIO2U features 24 XLR outputs. Simply connect it directly to snake cables, wiring boards, or stage boxes to begin playback instantly. The XLR jacks are reinforced with a robust design to withstand demanding touring environments. It combines studio-level clarity with tour-ready durability.

Large Front Panel Display – The Command Center for Live Performance

The sophisticated front panel display shows settings in real time, allowing you to check MIDI status, audio levels, and system status at a glance. It instantly warns you of computer problems or issues, allowing you to monitor and operate your performance with confidence. Intuitive displays enable quick and easy setup and troubleshooting.

Miracle MIDI Worker
PlayAUDIO2U is a core MIDI hub and control center featuring a 5-pin MIDI DIN, USB MIDI host, and two RTP MIDI-enabled Ethernet ports. Assign MIDI commands to programmable ports and front panel buttons to control your show directly from the unit. Advanced MIDI processing allows you to freely configure signal destinations and timing, optimize program changes, send all note-offs, and remove unwanted CC signals. It delivers high reliability even in complex live environments. A monster-class MIDI control center that brings together iConnectivity's unique technologies.

Performance Protection

Seamless Redundancy: PlayAUDIO2U protects performance with iConnectivity's unique multi-Mac/PC redundant configuration. It constantly monitors audio signals and MIDI, and instantly switches Macs/PCs at an unnoticed speed in case of problems. Advanced audio protection: It monitors not only software malfunctions but also the audio stream, automatically switching to safe mode when potential problems are detected. By muting the output audio and displaying diagnostic information, it prevents unwanted noise and cascading issues in PA systems and monitors.

■Specifications
Audio Input
■Analog Input
・XLR / 1/4” TRS Combo Input × 4
・Equipped with ultra-low noise microphone preamps
・Supports 48V phantom power

Audio Output
■Balanced XLR Output × 24
■Headphone Output: 1/4” TRS × 1 (with dedicated volume knob)

Audio Performance
■Quantization: Up to 24-bit AD/DA conversion
■Sample Rate: Up to 96 kHz
■Wide Dynamic Range Design (High-resolution audio for live use)

MIDI
■USB MIDI Host Port × 4
■DIN-MIDI Input × 2 / Output × 2
■RTP MIDI Ethernet Port × 2 (Up to 22 ports)
■Programmable Control Ports and Front Buttons × 4
■MIDI Learn Function Supported

Host Connection
■USB Type-C Host Connection × 2 (Mac / PC) (Redundant Configuration Supported)
■Automatic/Manual Computer Switching Mode

Controls
■Footswitch Terminal (2x2 Buttons)

■Rotary Encoder and Front Button Operation Supported

■Detailed Settings via Auracle Software

Protection Functions

■Audio Protection Function

■Output Terminal Phantom Power Protection Circuit

(Does not guarantee permanent 100% protection. The best course of action is to avoid supplying +48V phantom power to the audio interface's output terminals.)

Enclosure

■Rack Size: 2U

■Power Supply: 100-240V Built-in Switching Power Supply (IEC Power Connector)

Dimensions / Weight

・W 482 mm × D 200 mm × H 87 mm

・Approx. 3.8 kg

Contents

・PlayAUDIO2U Audio/MIDI Interface

・USB-C to USB-C Cable × 2

・Power Cable (Type B/G) (F / IEC) 1 each

■Bundled Software
*For details on the included software, please refer to the manufacturer's website: Manufacturer's website.

■Operating Environment
*For the latest operating environment, please refer to the manufacturer's website: Manufacturer's website.
*Returns due to failure to check the operating environment will not be accepted.