IMAGENICS / CRO-H2USB

<> HDMI-USB converter with EDID emulation and cable compensation functions that supports 4K60/4:4:4 HDMI signals.

■Video Converter (HDMI to USB)
Input Signal: Digital video signal (HDMI (DVI) INPUT)
TMDS signal (digital RGB, YPbPr (444, 422, 420))
1 HDMI-A connector (HDCP 1.4, 2.2 compatible, DVI signal input possible)
HDMI 2.0 standard compliant signal (including up to 8 channels of embedded audio) or 24-bit full color DVI Rev 1.0 standard compliant signal
Video signal with a pixel clock of 25 MHz to 600 MHz, a horizontal frequency of 15 kHz to 200 kHz, and a vertical frequency of 23 Hz to 240 Hz, with 320 to 4096 horizontal active pixels and 240 to 2160 vertical active lines Automatically supports
(Automatically supports D1 to D5 (FHD equivalent), 4K HDMI signals, and common PC resolution signals from 320x240@60 to 4096x2160@60)
■Output Signal Section:
Output digital serial video signal (IMG.LINK OUT-1, OUT-2)
1 digital serial signal using original re-encoding method, 1.0Vp-p, 75Ω, 2-way distribution, BNC x 2
Video bitrate after original re-encoding is approximately 2.5Gbps NRZI signal (constant bit rate, audio is 9.216Mbps)
Original bidirectional communication link function, IMG.LINK Rev2 standard (VC-2HQ video compression)
*Only IMG.LINK Rev2 signals can be output. Conventional IMG.LINK Rev1 signals cannot be output.
Please use an IMG.LINK Rev2-compatible device for the IMG.LINK receiver.
IMG.LINK Rev2 signals can be used with all conventional distributors and ILS series switchers.
■EDID function:
You can choose to either pass through the EDID data from the display device sent from the IMG.LINK receiver (DCE-U1RX, CRO-URS2A, etc.), or select and use one of the 15 built-in resolution data types using the ROT-SW settings.
Port 2 also supports 4K HDR video. Please refer to the instruction manual for details.
■Other Features:

Two-color LED indicators for input HDMI signal status, HDCP status, and link status

Built-in test pattern and tone generation

On-screen information display (collaborative processing with the receiver)

Long-reach operation setting function, etc.

■Power Supply/Power Consumption: DC 5V 1.0A 5W (max)

■Size: 60 (W) x 24 (H) x 100 (D) mm (excluding protrusions) / Approx. 280g (main unit only), Approx. 360g (including wing-shaped angle)

■Accessories

AC 100V 27VA 50Hz/60Hz AC adapter with lock for Japan use (5V 2.3A output)

HDMI connector retaining bracket (CL-2)

Wing-shaped angle (universal mounting bracket) (pre-installed)