IMAGENICS / CRO-RS11

This is a frame synchronizer for HDMI/DVI signals. It has a high-performance scan conversion function and automatically converts and outputs signals into various pre-set formats.

■HDMI (DVI) Frame Synchronizer (Scan Converter)

■Input Digital Video Signals
・TMDS signal (digital RGB, YPbPr): 1 HDMI-A connector (HDCP compatible, DVI signal input possible)
・HDMI standard-compliant signal (including up to 2 channels of embedded audio) or 24-bit full-color DVI Rev. 1.0 standard-compliant signal: Automatically supports video signals with a pixel clock of 25 MHz to 165 MHz, a horizontal frequency of 15 kHz to 200 kHz, and a vertical frequency of 23 Hz to 240 Hz, with horizontal active pixels of 320 to 2048 and vertical active lines of 240 to 1800 (D1 to D5 equivalent HDMI signals, VGA@60 to UXGA@60, WUXGA@60 (RB), 2048 (Automatically supports x1152 (RB) PC signals)

■ Built-in EDID emulation function
- Backup and copy EDID from the output HDMI terminal, or select the built-in resolution data using the ROT-SW.

■ Output digital video signal
- TMDS signal (digital RGB, YPbPr): 1 HDMI-A connector (HDCP compatible, DVI signal output possible)
- HDMI standard-compliant signal (including up to 8 channels of embedded audio) or 24-bit full-color DVI Rev. 1.0 standard-compliant signal: Fully automatic conversion to the video signal required by the display device's EDID data, with a pixel clock of 25 MHz to 165 MHz, horizontal active pixels of 640 to 2048, and vertical active lines of 480 to 1152. Vertical refresh rate is fixed at 59.94 Hz. (Automatic output support for D3, D4, and D5 resolution HDMI signals, as well as VGA@60 to UXGA@60, WUXGA@60 (RB), and 2048x1152 (RB) signals)

■Analog Embedded/De-Embedded Audio Input/Output Signals
- Analog Input Audio Signal -10dBu (1kΩ or less output): High-Impedance Unbalanced 2-Channel (RCA x 2)
- Analog Output Audio Signal -10dBu (10kΩ or more load): Low-Impedance Unbalanced 2-Channel (RCA x 2)
* Analog embedding and de-embedding functions are selectable using DIP-SW position 2.
* De-embedding is available for LPCM only; compressed audio signals are de-embedded. Dead zone not possible.

■ Absolute video and audio delay time
- HDMI (DVI) video output: 33 ms to 50 ms (equivalent to 2 to 3 fields of output video)
- HDMI audio output: Approximately 43 ms (2-channel stereo linear PCM 48k/24-bit) (HDMI input signal to HDMI output signal)
- Analog audio output: Approximately 43 ms (2-channel stereo linear PCM 48k/24-bit) (HDMI input signal to analog audio output)
* Active through for multi-LPCM and compressed audio systems.

■ LAN communication function
- 10BASE-T-T, 100BASE-TX (auto-detection) RJ451 system

■ External control function:
- External control of the unit is possible via the LAN terminal. Multi-screen support allows for custom zoom size and crop position, 90° and 180° rotation, and vertical and horizontal flipping.

■ Other Features
- LED display of input status, built-in test pattern and tone generation, on-screen information display, pseudo-seamless operation selection, aspect ratio conversion (maintaining), high-precision zoom and multi-screen crop zoom, 90° and 180° rotation and vertical and horizontal flipping, frame lock to input video vertical cycle, and more.


■ Power Supply/Power Consumption: DC 5V 1.2A 6W (max)
■ Size: 100(W) x 25(H) x 150(D) mm (excluding protrusions) / Approx. 550g
■ Accessories: AC 100V 27VA 50Hz/60Hz (Japan-use only) (5V 2.3A with output lock), HDMI retention brackets (CL-1) (2)