ALLPARTS / Replacement Jazz Bass 32 Inch Scale Neck Roasted Maple

This Fender-approved, Japanese-made Jazz Bass conversion neck is perfect for beginners and guitarists alike. Its 32-inch medium scale and narrow fret spacing make it incredibly easy to play. The satin finish ensures comfortable playability. Recommended for those looking to easily change their playing style.

■Bass Neck
■Jazz Bass JRF-RM-CONV
■Fender Licensed
■Scale Length: 32"" (Fits 34"" scale Fender® bodies)
■Neck Shape: C
■Frets: 20 Jumbo Frets (.108"" x .045"")
■Wood: Roasted Maple with Rosewood Fingerboard
■Finish: Satin Polyurethane
■Fingerboard Radius: Compound 7.25""-10""
■Inlays: White Fingerboard and Side Dots
■Nut Width: 1.5""
■Heel Width: 2.5""
■Heel Shape: Round
■Tune Holes: Vintage Two-Stage
- Bushing Hole Diameter: 11/16"" (17.46mm)
- Post Hole Diameter: 9/16"" (14.28mm)
■Truss Rod Adjustment Positions: Heel side
■Neck Thickness:
- 1st Fret: 0.89 inches
- 12th Fret: 1.0 inches

About the Allparts Select Series

This series produces the finest products in terms of quality, playability, wood grade, and luxurious finishes.

- Roasted Processing
Roasting wood reduces the moisture content to approximately 7%. This results in a neck with a richer tone, superior strength, and stability that is less susceptible to changes in weather.

[Note]
- The grain varies from instrument to instrument. Images are for illustrative purposes only.
- Depending on the neck, fret filing or sanding may be necessary. This is normal and not a defect.
- To prevent the effects of moisture, we recommend applying a sealer to unpainted necks before installation.
- Roasted maple has a lower moisture content, increasing the risk of cracking. When driving screws, always measure the inner and outer diameters of the screw threads and use the appropriate drill bit. Do not force a screw into a hole drilled with an inappropriate drill bit.