ALLPARTS / Replacement Precision Bass Neck Roasted Maple

This is an officially Fender-approved, Japan-made replacement neck for the Precision Bass. The wide nut and thick, stable neck profile provide a powerful playing feel loved by players of a wide range of genres, from R&B to punk and metal. The roasted maple and compound-radius fingerboard provide modern comfort and stability.

■Bass Neck
■PMF-RM for Precision Bass
■Fender Licensed
■Features and Specifications
■Scale Length: 34 inches
■Neck Shape: C
■Frets: 20 Jumbo Frets (.108"" x .045"")
■Wood: 1-Piece Roasted Maple
■Finish: Satin Polyurethane
■Fingerboard Radius: Compound 7.25""-10""
■Inlays: Black Fingerboard and Side Dots
■Nut Width: 1-5/8 inches
■Heel Width: 2.5 inches
■Heel Shape: Round
■Tune Holes: Vintage Two-Stage
- Bushing Hole Diameter: 11/16"" (17.46mm)
- Post Hole Diameter: 9/16"" (14.28mm)
■Truss Rod Adjustment: Heel Side
■Neck Thickness:
- 1st Fret: 0.92 inches
- 12th Fret: 1.01 inches

About the Allparts Select Series

This series produces the finest products in terms of quality, playability, wood grade, and luxurious finishes.

Roasted Processing
Roasting wood reduces the moisture content to approximately 7%, resulting in a neck with a richer tone, superior strength, and stability that is less susceptible to changes in weather.

[Note]
- The grain varies from instrument to instrument. Images are for illustrative purposes only.
- Depending on the neck, fret filing or sanding may be necessary. This is normal and not a defect.
- To prevent the effects of moisture, we recommend applying a sealer to unpainted necks before installation.
- Roasted maple has a lower moisture content, increasing the risk of cracking. When driving screws, always measure the inner and outer diameters of the screw threads and use the appropriate drill bit. Do not force a screw into a hole drilled with an incorrect size drill bit.