IMAGENICS / CRO-AE19

This is a multi-channel audio embedder/de-embedder that can embed analog audio into HDMI signals and de-embed audio embedded in HDMI signals as analog audio [LF].

■DVI/HDMI Analog Audio Embedder/De-embedder
*Made to order
■Video Input/Output
HDMI Type A 19-pin connector: One input, one output
TMDS signal (24-bit full-color DVI Rev. 1.0 compliant signal or HDMI signal)
Supports pixel clocks from 25 MHz to 165 MHz (VGA@60 to UXGA@60 and WUXGA@60 (RB))

HDCP compatible, 3D compatible, DeepColor not supported, CEC control signal pass-through, HEAC and ARC not supported, output in DVI format when a DVI monitor is connected
HDCP compatible, audio embedded is converted to HDMI format for output
■Video Settings
Output Video Format: Auto, Force DVI, Force HDMI
TMDS Adjustments: Input Equalization, Output Pre-emphasis, Output Amplitude, Output Termination
EDID Settings: Emulate, EDID Copy
■Video Delay between Input and Output: Less than 1 μs (VGA@60 max)
■Audio Input/Output: RCA terminals, analog audio, unbalanced, 4 channels
Switchable between input and output using the switch on the top of the unit (every 2 channel pair)
-10dBu, approx. 75KΩ
■Analog Audio Sampling
Embedding Mode: Automatic, Manual Mapping
・When HDMI audio input is active: 16-24 bit, 16kHz-96kHz (depending on HDMI audio input)
・When HDMI audio input is not active: 24 bit, 48kHz linear PCM
Embedding Mode: Embed Priority, De-embedding Priority, Test Tone: 24 bit, 48kHz linear PCM
■Audio De-embedding: Supports linear PCM (16-bit-24 bit/16kHz-96kHz) input
■Audio Settings Embedding Mode Settings: Auto, Embed Priority, De-embed Priority, Manual Mapping, Through, Cut, Test Tone
Level Adjustment: +20dB to -40dB, MUTE/0.5dB increments, configurable for each audio channel
Delay Adjustment: Up to 2500ms/10ms increments, configurable for each audio channel
■Input/Output Audio Delay
Approximately 440μs when de-embedding (sampling frequency 48kHz, delay adjustment 0ms)
Approximately 420μs when embedding (sampling frequency 48kHz, delay adjustment 0ms)
■On-Screen Functions:
Input/Output Signal Detection Information Display, Connected Device Detection Information Display
■Power Supply: DC5V0.8A
■Power Consumption: Max. 4W
■Weight: Approx. 500g
■Size: 100(W) x 25(H) x 150(D)mm *Not including protrusions
■Accessories ：
One AC adapter for domestic use (100V 27VA 50Hz/60Hz, 5V 2.3A output)