IMAGENICS / HDC-165

The HDC-165 is a down-converter that converts HDMI and DVI signals into composite or component video signals. [LF] For HDMI signals, it can output the embedded audio signal as analog.

■HDMI (DVI) Downconverter

■Video Input
HDMI/DVI Signal: TMDS 25MHz-165MHz 24-bit (VGA@60-UXGA@60,
WUXGA@60RB, 2048x1152@60RB, and D1-D5 signals),
1 HDMI Type A 19-pin connector (*1) (*2)
■Video Output
Composite: 1.0V(p-p), 75Ω, NTSC standard, 1 RCA pin jack (*3)
Component: Output Level: Y: 1.0V(p-p), Pb(Cb)/Pr(Cr): 0.7V(p-p), 75Ω
Output Format: 480i, 480p, 1080i, 720p, 1 RCA pin jack (*3)
■Video Input/Output Delay: Approx. 33 ms to 66ms
■Audio Input Linear PCM: 32kHz to 48kHz, 16bit to 24bit
■Audio Output
Audio Output Terminal: Stereo unbalanced, 1 RCA pin jack
Maximum Output Level: 2.1V (rms) (+8.7dBu)
Audio Quantization: Based on input signal
Frequency Response: 30Hz to 20kHz, -1dB to +1dB
Crosstalk: 75dB or more (L-R)
S/N Ratio: 80dB or more
Distortion: 0.015% or less (-10dBu 1kHz, fs=48kHz)
■Other EDID Features:
Emulation function, zoom function, and shift function (※4)(※5), on-screen menu display, backup memory
■Power Supply/Power Consumption: AC90V to AC250V 50Hz/60Hz
■Weight: Approximately 650g
■Size: 100(W) x 40(H) x 180(D) mm (excluding protrusions) (※6) (※7)
■Accessories: Domestic-use power cord with locking mechanism (3P-3SL), power switch cover (1), HDMI cable retaining clamp (1), power 3P-2P conversion adapter (1)

We recommend using only Imagenics DVI/HDMI-related devices and cables. Mixing Imagenics products with other companies' (including overseas) products may result in performance issues and unexpected malfunctions. In such cases, we cannot guarantee the operation of Imagenics products.

※1: Copyright-protected signals (HDCP) are not supported.
※ 2: This unit does not have a cable compensation function at the input, so please use an Imagenics HDMI (HDP-HDP) cable up to 5m long, or an Imagenics DVI (DVIP-DVIP) cable up to 10m long.
For cables longer than this, we recommend using an Imagenics cable compensation device or similar.
*3: The composite signal (VIDEO) and component signal (Y) connectors are shared.
*4: Supports zoom from 70% to 200%.
*5: Shift is only possible when zooming. Cropping is not supported.
*6: Please note that specifications and appearance may be changed without notice for improvement purposes.
""""
""