EARTHWORKS / DK7 Gen 2

DK7 is a high-quality drum microphone kit combining presence, power and convenience for stage, studio and streaming.

■ new active electronics
Second-generation Earthworks microphones draw just 6 mA of phantom current, improving operation with devices including transformer-based preamps and splitters.
Additional protection reduces risks from accidental hot plugging. Connecting with phantom power on can create damaging transients under some conditions; switch phantom power off before changing connections even when workflows or session recalls make this inconvenient.
Second-generation Earthworks microphones feature enhanced protection for power conditions beyond those typically encountered with major touring consoles and stage boxes.

■ new rim-mount system
RM2 securely attaches DM20 Gen 2 to snare or tom rims, providing a low-profile, tour-ready solution without a microphone stand.
RM2 speeds up tom and snare setup and offers broad compatibility with metal drum hoops and suspension mounts.

■ smaller, stronger case
The new SKB road case offers high durability for transport and touring.

【 specifications 】

DM20 Gen 2
■ Frequency response: 20 Hz-20 KHz
・Polar pattern: Cardioid
Sensitivity: -51 dBV/Pa (2.8 mV/Pa)
■ Maximum input level: 157dB SPL
minimum impedance:1kOhm
noise:20 dBSPL (A-Weighted)
power requirements:48V, 6mA
dimensions:203.2 mm x 21.84 mm
color:stainless steel steel
■ Weikght: 0.18 kg
gooseneck dimensions:88.9 mm x 9.53 mm
Includes RM2 rim mount, microphone bag and foam windscreen

SR25 Gen 2
■Frequency response: 20Hz-25KHz
・Polar pattern: supercardioid
Sensitivity: -36 dBV/Pa (15.8 mV/Pa)
noise:20 dBSPL (A-Weighted)
■ Maximum input level: 148dB SPL
minimum impedance:1kOhm
power requirements:48V, 6mA
dimensions:105.15 mm x 21.84 mm
color:stainless steel steel
■ WeiKght: 0.10 Kg
Includes microphone clip, microphone bag and foam windscreen

DM6
Microphone type: condenser
■ Frequency response: 20 Hz-20 KHz
・Polar pattern: supercardioid
sensitivity (1kHz):-60 dBV/Pa (1mV/Pa)
maximum input level:150 dB SPL
power requirements:48V phantom, 6.5mA
minimum impedance:1kOhm
Includes M2-R ball mount and windscreen
Dimensions: 4.97 × 1.93 inches, including windscreen, excluding M2-R
color:stainless steel steel, black windscreen
■ Weikght: 0.58 kg