SENNHEISER / MKH 8030

The MKH 8030 figure-8 microphone allows recording professionals to capture pristine sound over an extended frequency range in nearly any environment. The MKH 8030 is ideal for M-S, double M-S, and Blumlein stereo recording options or wherever the highest attenuation of neighboring sound sources is required.

-Bi-directional figure-8 polar pattern captures sound equally from front and rear while efficiently rejecting sound from the side
-Highly symmetrical and frequency-independent pick-up pattern
-Ideal choice for combining with a cardioid or super-cardioid mic to provide a MS-Stereo setting
-Low-tension diaphragm and symmetrical, acoustically open push-pull transducer design keeps the sound flow as unrestricted and undistorted as possible
-Extended bass response allows for capturing sound in its full frequency extent and gives more freedom for microphone positioning
-Extended treble range (up to 50 kHz) captures sound in fine detail with precise transient response
-German-engineered with durable metal housing and rugged construction for superior reliability
-Moisture-resistant design ideal for use in humid, hot, and cold environments where other mics fail
-Low self-noise for greater detail in audio; retains the softness of quiet sounds, increases dynamics, and more
-Low non-linear distortion avoids adding new frequency spectrum thus keeping sonic clarity
-Compact size for easy transport; visually unobtrusive in live shows or TV
-Modular design allows for easy combination with various MKH 8000 accessories
-Nextel® non-reflecting paint ensures no reflection from stage lights, keeping mic visually unobtrusive in live shows or TV

Dimensions: Φ 19 mm, L 59 mm (93 mm with MZX 8000)
Weight (g): 38 g (70 g with MZX 8000)
Max. sound pressure level: 139 dB
Sensitivity: -31 dBV/Pa (28 mV/Pa)


MKH 8030 Microphone x1
MZW 8030 Foam Windshield x1
MZQ 8000 Mic clamp x1
MZX 8000 XLR Module x1
Rycote Back-to-Back clips x2
Safety instructions
Quick guide

Pick-up pattern: figure-of-eight
Frequency response: 30 - 50,000 Hz
Sensitivity: -31 dBV/Pa (28 mV/Pa)
Max. SPL: 139 dB
Equivalent noise level: 13 dB(A)
21 dB (CCIR)
Phantom powering: 48 V ±4 V (P48, IEC 61938)
Current consumption: 3.3 mA
Diameter: approx. 19 mm, max 21 mm
Length: approx. 59 mm
with MZX 8000: approx. 93 mm
Weight: approx. 38 g
with MZX 8000: approx. 70 g
Operating: -10 °C to 60 °C
Temperature: (14 °F to 140 °F)
Storage: -20 °C to 70 °C
temperature: (-4 °F to 158 °F)
Relative humidity: 5 to 95%, non-condensing