IMAGENICS / CRO-FD24RX

This is an HDMI/DVI optical extension receiver that is used in pair with the transmitter CRO-FD24TX.

■HDMI/DVI optical extension receiver
■Optical input section:
Optical input level: -18dBm to -1dBm (average power)
Laser oscillation wavelength: 1.3μm
Laser safety: Class 1 (JIS C 6802, IEC 825-1)
■Compatible optical fiber and connector specifications
Fiber type: single mode fiber
Category, core diameter, cladding: 9.5μm/125μm when equivalent to OS1
Number of hearts: 1
Polishing: PC polishing, SPC polishing, AdPC polishing, UPC polishing
Connector: SC connector
Fiber type: GI multimode fiber
Category, core diameter, cladding: 50μm/125μm when equivalent to OM3 and OM2, 62.5μm/125μm when equivalent to OM1 (dimensions are reference values)
Number of hearts: 1
Polishing: PC polishing,
Connector: SC connector
■Video output section:
1 HDMI-A connector
TMDS signal (digital RGB, YPbPr): 1 HDMI-A connector
Single link TMDS signal (24bit full color signal) 1 system
Supports pixel clock 25MHz to 165MHz (VGA@60 to UXGA@60 and WUXGA@60(RB))
*HDCP compatible, DVI signal input possible
*The video signal sent from the transmitter is output as is.
■Audio output section:
Stereo mini jack φ3.5
1 unbalanced analog audio 2 channel system
■Output impedance: low impedance
■Audio frequency characteristics: -1dB to +1dB at 20Hz to 20kHz
■Audio SN ratio: 82dB or more (passed through a 1kHz A-weighted filter)
■Audio distortion rate: 0.05% or less
■Audio sampling frequency: 24bit 48kHz linear PCM method
■Maximum audio output level: +10dBu (at HDMI embedded audio output 0dBFs)
■RS-232C: D-Sub 9 pin male 1 system
Select baud rate from 9.6 kbps, 19.2 kbps, 38.4 kbps
*This device is only capable of one-way transmission from the transmitter to the receiver.
■Built-in functions:
Plug and play function (built-in EDID for emulation)
Test pattern output
Embedded audio conversion function for analog audio,
On-screen operating status information display function
■Transmission distance:
When using single mode fiber: Maximum approximately 10km
When using multimode fiber: Maximum approximately 1km
*Transmission distance may vary depending on the characteristics of the optical transmission line.
■Power supply: DC 5V 0.8A
■Power consumption: 4W (maximum)
■Mass: Approx. 500 g
■Accessories:
AC100V 27VA 50Hz/60Hz
1 domestic AC adapter (5 V 2.3A output)
HDMI connector retainer (CL-1) 1 piece
1 optical attenuator
■SIZE: 100(W)x25(H)x150(D)mm *Excluding protrusions