IMAGENICS / CRO-UD16

This compact and good deal for budget-friendly 4K full spec HDMI distributor is a simple 6-distributor for HDMI signals compliant with HDMI 2.0/1.4 and HDCP 2.2/1.4 standards and is equipped with a color conversion function using EDID on the output side and a fully automatic down conversion function from 4K video to FHD video.

4KHDMI(DVI) 1-input 6-distributor
4K Signal Method
TMDS clock: 25 MHz to 340 MHz
Pixel clock: 25 MHz to 600 MHz
Data rate: 0.75 to 18 Gbps
HDCP: 1.4/2.2
Supported resolutions: 4K60p 4:4:4 24bit, 4K60p 4:2:2 36bit, 4K30p 4:4:4 36bit, etc.
■ Video signal method:
TMDS signal (digital RGB/YPbPr) pixel clock 25 MHz to 600 MHz (TMDS clock 25 MHz to 340 MHz)
Automatic support for HDMI signals equivalent to 4K, D1 to D5, and PC signals from 640 x 480 to 4,096 x 2,160
Supports up to 36-bit deep color (4K60@422) or 24-bit full color (4K60@444) standard-compliant HDMI signals with data rates up to 18 Gbps
■HDMI Input: HDMI Type A 19-pin connector (HDCP 1.4, 2.2 compliant, DVI signal input possible)
HDMI output: HDMI Type A 19-pin connector, 1 x 6 distribution (HDCP 1.4, 2.2 compliant, automatic color space conversion and DVI signal output possible)
Automatic color space conversion (4K60YUV420, etc.) and down-conversion to FHD are available for each output terminal.
Input cable length: PC (VESA), D5, etc. up to 6 Gbps video ~ 30m
4K30, 60(420), etc., up to 10.2 Gbps: 20m
4K60 (422,444), etc., up to 18 Gbps up to 10m
When using an HDMI long cable manufactured by IMAGENICS and output signals from our specified products.
Excluding output signals from consumer and home-use equipment and products of other manufacturers.
■Output side connection cable length:
PC(VESA). Video up to 6Gbps such as D5 ~ 10m
4K30, 60(420), etc. up to 10.2Gbps: 5m
4K60 (422,444), etc. up to 18Gbps up to 3m
When using an HDMI cable manufactured by IMAGENICS.
*The cable may be shortened due to the reception sensitivity of the display device.
■EDID emulation function:
EDID data from the HDMI OUT-1 terminal is always copied back up and used (default setting)
Emulation of general 4K60-compatible TVs and monitors is possible by setting DIP-SW1.
Others:
Function to forcibly inhibit input HDCP operation
Adaptive color space conversion and down-conversion function based on acquired EDID data
The message function uses two-color LEDs that light up and blink, among others.
Power supply: DC 5V 1.1 A 5.5 W (max.)
SIZE：100(W)x25(H)x150(D)mm *Excluding projections
Weight: Approx. 550 g
■Accessory:
AC100 V27VA 50Hz 60Hz Domestic AC adapter (5V 2.3A output with lock)
HDMI Retaining Clip (CL-1) and seven sets of bundling bands
HDMI Retaining Clip (CL-1) may not function depending on the thickness of the HDMI connector to which it is attached.