IMAGENICS / CRO-DAC11

A D/A converter that converts DVI-D to analog RGB. The included conversion connector also supports HDMI signals, in which case the embedded audio signal can be output as analog.

■DVI (HDMI) input analog RGB converter
■Input signal section
Input signal:
DVI Rev1.0 compliant DVI-D 24 pin connector single link 1 system
Supported formats:
VGA@60 to UXGA＠60, WUXGA@60RB and HDMI compatible signals equivalent to D1 to D5
■Video output section
Output signal: Analog RGB signal mini D-Sub 15 pin connector
Output level: RGB signal each 0.7 V (p-p) 75 Ω drive, horizontal and vertical sync signals each TTL level output
■Audio output section
Output terminal:
RCA pin jack unbalanced 2-channel stereo 1 system
Output level:
-10 dBu (-20 dBFs, 10 kΩ or more load)
Audio frequency response:
-1 dB to +1 dB at 20 Hz to 20 kHz
S/N ratio:
85 dB or more (1 kHz A-weighting, reference -10 dBu output)
Crosstalk: 80dB or more
Distortion: 0.03% or less (-10 dBu output 1 kHz)
■Power supply: DC 5 V 1.0 A
■Power consumption: 5 W (maximum)
■Weight: Approximately 550 g
■Operating temperature and humidity range: 0 ℃ to 40 ℃ 20% RH to 90% RH (no condensation)
■Storage temperature and humidity range: -20 ℃ to 70 ℃ 20% RH to 90% RH (no condensation)
■Accessories:
1 AC100V 27VA 50Hz / 60Hz domestic AC adapter (5V 2.3A output)
1 DVI-D (male) to HDMI (female) conversion connector
■SIZE: 100 (W) x 25 (H) x 150 (D) mm