ここから本文です

さうんどはうしゅ

IK MULTIMEDIA / iRig Pro Quattro I/O

IK MULTIMEDIA / iRig Pro Quattro I/O

  • IK MULTIMEDIA / iRig Pro Quattro I/O画像1
  • IK MULTIMEDIA / iRig Pro Quattro I/O画像2
  • IK MULTIMEDIA / iRig Pro Quattro I/O画像3
  • IK MULTIMEDIA / iRig Pro Quattro I/O画像4
  • IK MULTIMEDIA / iRig Pro Quattro I/O画像5
  • IK MULTIMEDIA / iRig Pro Quattro I/O画像6
  • メーカーサイトManufacturer Site
A professional mobile audio interface that condenses many functions. Although compact, it is useful in various applications such as music production and distribution, field recording, and use as a mixer.
■ Professional mobile studio
Have you ever lost a cable or connector in the middle of shooting? You must avoid ruining your recording due to technical issues before, during, or even after shooting.

The iRig Pro Quattro I / O, a professional, 4 IN / 2 OUT portable audio MIDI interface, is one answer to dispel such concerns. From field recording and content creation to streaming, podcasting and more, the iRig Pro Quattro I / O is packed with features for a wide range of applications without the need for complicated wiring.

■ Condensed many functions into a compact body
The iRig Pro Quattro I / O is a 4 IN / 2 OUT mobile audio / MIDI interface with a high-definition mic preamp and a 24-bit / 96 kHz converter.

The package includes everything you need, including cables, stand adapters, batteries, and you can record broadcast quality right away. Also available is the iRig Pro Quattro I / O Deluxe, which includes a genuine iRig MIC XY, windscreen, power adapter and carrying case.


■ Compatible with all uses

・ As a mobile interface
Connect to desktops, laptops and mobile devices
Multi-channel interface for up to 24-bit / 96 kHz
Connect a MIDI-compatible device to MIDI IN / OUT
Full input / output terminals
4 IN / 2 OUT interface / mixer
MFi certification for seamless performance with iPhone and iPad

・ As a distribution interface
STEREO mode that mixes all signals into stereo
MONO mode for distribution apps that only support monaural
Headphone output that supports direct monitoring that can be turned ON / OFF
Loopback function
A microphone or line-level instrument can be connected to Input 3-4, and the signal processed by the app can be routed to channel 1-2 (Loopback + function).

・ For field recording
Turn your iOS / Android device into a multifunctional field recorder
Record directly to your mobile device or Mac / PC instead of SD card
Recording with a built-in DSP-controlled MEMS microphone is also possible.
Powered by 4 AA batteries, USB mobile battery
Deluxe Bundle Includes iRig MIC XY, Windscreen

・ As a stand-alone mixer
XLR combo input terminal with + 48V phantom power that supports connection of up to 4 condenser microphones
Powered by USB battery, 9V power adapter, 4 AA batteries
Mix multiple signals with full input / output
Input multiple sound source sources to a digital SLR camera
Includes standard camera UNC 1 / 4-20 adapter

■ Three modes (MULTI, STEREO, MONO)
The iRig Pro Quattro I / O can be switched between three modes (MULTI, STEREO, MONO) with the MODE switch. In STEREO and MONO modes, all inputs, including the built-in MEMS mic and loopback, are mixed in stereo (or monaural). You can choose the best mix for your application.

If you select MULTI when using DAW, MIC / INST IN 1-2 for mic / Hi-Z instrument input can be input 1-2, MIC / LINE IN 3-4 for mic / line input, RCA IN 3-4 or Multi-routing is possible with 3.5 mm Stereo IN 3/4 as Input 3-4.


■ Genuine XY microphone
The iRig Pro Quattro I / O can be fitted with an optional iRig MIC XY microphone (included with the iRig Pro Quattro I / O Deluxe). By using a cardioid condenser microphone in the XY format, you can record clear stereo sound.

The frequency response from 20 Hz to 20 kHz and the dynamic range of 145 dB SPL enable natural and immersive field recording. Also, even if an unexpectedly loud volume is input, it is safe to make a backup with the safety channel function.


■ Safety Channel
In STEREO and MONO modes, Input 3-4 selected for recording acts as a safety channel where the same mix signal as Input 1-2 is sent at a 12 dB lower level. Track 1-2 on the recording side can be used as the main, and Track 3-4 can be used as a backup when an unexpectedly loud volume is input.


■ Loopback + Function
If you use the Loopback + function, you can also deliver beyond the normal loopback, such as singing along with the playback of the music app. This allows you to connect a microphone or line-level instrument to Input 3-4 of the iRig Pro Quattro I / O and route the signals processed by MixBox, AmpliTube, VocaLive, etc. to channel 1-2.

This Loopback + feature allows you to deliver professionally processed audio and creative sound using only mobile devices such as iOS and Android.


■ No recording media required
The iRig Pro Quattro I / O can record digital audio that is faithful to the original sound directly to your mobile device or Mac / PC. For this reason, recording media such as SD cards are not required, and there is no need for formatting. The recorded audio is recorded on the host device and can be immediately backed up or shared to the cloud over the network.


■ Enhanced bonus software
If you register as a user of iRig Pro Quattro I / O, you will receive Mac / PC software worth about 83,000 yen as a benefit. In addition to the T-Rack S 5 SE with 10 different processors such as EQ, compressor and reverb, the AmpliTube 5 SE with over 80 gear models needed for guitar and bass, the MODO BASS SE, MODO DRUM 1.5 SE and Miroslav Choose from two products: Philharmonik 2 CE, SampleTank 4 SE, and Syntronik 2 SE.

At the same time, MixBox CS for iPad and iRig Recorder 3 LE will unlock the full specifications, and you will also receive a benefit equivalent to in-app purchase of about 12,000 yen.

Enjoy creating high-quality audio content by combining the versatile iRig Pro Quattro I / O with bonus software that enables various processing and editing.


■ Main features
-Professional mobile audio MIDI interface
・ Connect to iPhone, iPad, Android, Mac / PC
・ Converter that supports resolution of up to 24-bit / 96 kHz
・ Microphone / Hi-Z compatible XLR combo input x 2, Microphone / line input compatible XLR combo input x 2 (both support + 48V phantom power)
RCA line input x 2, 3.5 mm stereo line input
・ Built-in MEMS microphone
-Balanced XLR output x 2
・ Headphone output (compatible with direct monitoring)
・ 3.5 mm stereo line output
・ MULTI, STEREO, MONO mode
-Operates as a single mixer
・ Equipped with limiter and -12 dB safety channel function
-USB bus power, 4 AA batteries, 9V power adapter (iRig PSU 9175), powered by USB battery
Bundled with high-quality software

■ Accessories
1/4 inch thread adapter, Lightning to Mini-DIN connection cable (60 cm), USB-C to Mini-DIN connection cable (60 cm), USB-A to Mini-DIN connection cable (60 cm), 2.5 mm TRS Male-MIDI female adapter (10 cm), 4 AA batteries

* For the operating environment, be sure to check information on the agency site . Please confirm.

レビューを投稿するWrite a Review

  • この商品のレビューを書くWrite a Review

IK MULTIMEDIA (アイケーマルチメディア)
iRig Pro Quattro I/O

Item ID:308810

41,250 yen(incl. tax)

  • Free Shipping

4,124Pt(10%)Detail

  • 412Pts

    通常ポイント

  • 3,712Pts

    ボーナスポイント

  • 4,124Pts

    Total

close

No Longer Available

Categories

Search by Brand

Brand List
FACEBOOK LINE YouTube X Instagram TikTok