AJA Video Systems / 12G-AM

This 8-channel AES audio embedder/disembedder can handle up to 4K/UltraHD with 12G-SDI input and output. It can pass through 12G-SDI input audio or embed AES audio input from a breakout cable.

■8 channel AES audio embedder/disembedder (fiber option) ■12G-SDI support ■Video formats: (4K) 4096 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (UltraHD) 3840 x 2160p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (2K) 2048 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (HD) 1920 x 1080p 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 (HD) 1920 x 1080i 25, 29.97, 30 (HD) 1280 x 720p 50, 59.94, 60* (SD) 625i 25 (SD) 525i 29.97 RGB and YCbCr, 4:4:4/4:2:2, 10-bit Note: Please check 12G-AM video formats in the documentation and manual for supported resolutions and frame rates. ■Digital Video Input: 1 x 12G-SDI BNC, SMPTE 259/292/424/2081/2082 Single Link SD/HD/2K/UltraHD/4K Single Link 3G-SDI Levels A and B-DL, SMPTE 425 ■Fiber Input (12G-AM-R, 12G-AM-TR): 1 x 12G-SDI Fiber LC Connector, SMPTE 297/259/292/424/2081/2082 Wavelength: Rx 1260 nm (min), 1620 nm (max) Optical Sensitivity: -10 dBm (min 12 Gbps), -14 dBm (min 3 Gbps) Overload Power: -2 dBm (min) ■Fiber Input (12G-AM-R-ST): 1 x 12G-SDI Fiber ST Connector 1, SMPTE 297/259/292/424/2081/2082 Wavelength: Rx 1260 nm (min), 1620 nm (max) Optical sensitivity: -10 dBm (min 12 Gbps), -14 dBm (min 3 Gbps) Overload power: -2 dBm (min) Digital video output: 1 x 12G-SDI BNC, SMPTE 259/292/424/2081/2082 Single link SD/HD/2K/UltraHD/4K Single link 3G-SDI Level A and B-DL, SMPTE 425 Fiber output (12G-AM-T, 12G-AM-TR): 1 x 12G-SDI Fiber LC connector, SMPTE 297/259/292/424/2081/2082 Nominal Wavelength: Tx 1260 nm (min), 1310 nm (typ), 1360 nm (max) Optical Power: -5 dBm (min), 0.5 dBm (max) Attenuation: 5.4 dB (min) ■Fiber Output (12G-AM-T-ST): 1 x 12G-SDI Fiber ST connector, SMPTE 297/259/292/424/2081/2082 Nominal Wavelength: Tx 1260 nm (min), 1310 nm (typ), 1360 nm (max) Optical Power: -5 dBm (min), 2 dBm (max) Attenuation: 3.4 dB (min) ■Cable Equalization: (Belden 1694A coaxial) 12 Gbps, 65m 6 Gbps, 125m 3 Gbps, 190m 1.5 Gbps, 200m 270 Mbps, 405m ■Video Path Delay: The video output is reclocked at the same frame rate as the video input and delayed. If there is no input, the video output will not be displayed. Video Latency (time measured between video input and video output connectors) 12G = 3.2 ?sec 6G = 3.2 ?sec 3G level A = 3.2 ?sec 3G level B-DL = 6.3 ?sec HD (1.5 Gb) = 6.3 ?sec SD (270 Mb) = 17.2 ?sec ■Audio I/O: AES PCM audio is converted on one 25-pin D-Sub female connector, with 8-channel input and 8-channel output selectable in pairs. Breakout cable included (one 25-pin D-Sub male connector) Breakout connector 4 x XLR female inputs (AES3 110 ohm) Breakout connector 4 x XLR male outputs (AES3 110 ohm) ■Audio Data Format AES3-2003 ■Embedded Audio: SMPTE 272M (SD): 20-bit, synchronous at 48kHz SMPTE 299M (3G/HD): 24-bit, synchronous at 48kHz Embedded audio can be passed through, removed or overwritten Supports up to 16 channels Note: Supports up to 8 channels of embedded audio in 2048 x 1080p/psf 29.97 and 30 formats ■Embedded path audio latency (time measured between audio input and video output connector): 1500 ?sec (SRC ON) 400 ?sec (SRC OFF) ■Disembedded path audio latency (time measured between video input and audio output connector): 210 ?sec ■User interface: External DIP switch USB connection operates the MiniConfig software application for configuring the device via Mac or Windows ■Power: +5-16VDC, 10 watts, Power adapter included Size: 147.32(W)x25.4(H)x78.74(D)mm 0.3 kg