audio technica / AT-LPW50PB JP

Belt Driven Table

■Specifications
Model: Belt drive manual turntable
Drive motor: DC servo motor with active speed control
Drive system: Belt drive system
Speed: 33-1/3 or 45 rpm
Turntable platter: Made of die-cast aluminum
Wow and flutter: <0.15% WRM (at 33 rpm)
S/N ratio:> 60dB
Output level: PHONO: Standard value 4.0mV (1kHz, 5cm/sec)
LINE: Standard value 200mV (1kHz, 5cm/sec)
PHONO preamp gain: standard value 35dB, equalizer characteristic RIAA

■Specifications of tone arm
Classification: Static balance type straight type carbon tone arm
Effective length: 223.6mm
Overhang: 18.6mm
Maximum tracking error angle: less than 2.0°
Needle pressure adjustment range: 0 to 3.0 g
Usable cartridge weight range: 11.5-16.5g (including head shell)

■ Cartridge and headshell specifications
Cartridge model: AT-VM95E BK
Cartridge type: VM type stereo cartridge
Recommended load impedance: 47kΩ
Output voltage: 4.0mV (1kHz, 5cm/sec)
Stylus: 0.3×0.7mil junction elliptical needle
Cantilever: Aluminum pipe
Stylus pressure range: 1.8-2.2g (standard value 2.0g)
Cartridge weight: 6.1g
Headshell model: AT-HS4 BK
Headshell mass: 8.5g (excluding lead wire)
Headshell overhang adjustment range: ±5 mm

■ General specifications
Power condition: 100-240V, 50/60Hz, 0.5A Max.
Power consumption: 1.3W
AC adapter: 12V, 0.5A
External dimensions: H126 x W420 x D340mm
Weight: 5.56kg

■ Accessories
Dust cover, dust cover hinge, platter (with drive belt), counter weight, rubber mat, EP adapter, AC adapter (about 1.5 m), audio cable (about 1.0 m), VM type stereo cartridge (AT-VM95E BK) included Head shell (AT-HS4 BK)

■ Sold separately
Replacement Belt AT-LPW50PB Belt, Replacement Head Shell AT-HS4 BK, Replacement Needle AT-VMN95E BK