ROLAND / HT-TX01

HDBaseT standard compatible transmitter

■ Supported resolutions:
480/59.94i, 576/50i, 480/59.94p, 576/50p, 720/59.94p, 720/50p, 1080/59.94i,
1080/50i, 1080/59.94p, 1080/50p, 640x480, 800x600, 1024x768, 1280x768,
1280 x 1024, 1366 x 768, 1400 x 1050, 1600 x 1200, 1920 x 1200
*RGB format: VESA DMT Version 1.0 Revision 11 compliant
*The refresh rate of RGB format is 60Hz at 1600×1200 and 1920×1200, and 75Hz at other times.
*1920×1200/60Hz: Reduced blanking
■ Audio signal Maximum PCM 8ch, Dolby Digital, True HD DTS-HD Master Audio
■ Input terminal:
HT-TX01: HDMI x 1: Type A (19 pins)
HT-RX01: RJ45 x 1
■ Output terminal:
HT-TX01 RJ45 x 1
HT-RX01 HDMI x 1: Type A (19 pins)
■ Other terminals:
RS-232×1: 9-pin D-sub type
*When using the included RS-232 conversion cable
Communication method: Asynchronous (asynchronous) full-duplex
Communication speed: 9600bps, 19200bps, 38400bps, 115200bps
Parity: None, Data length: 8bit, Stop bit length: 1bit
Code system: ASCII, Flow control: None
■ Maximum transmission distance: 100m
*For the HDBaseT terminal, use a shielded LAN cable of Cat5e (category 5e) or higher. If an improper cable is connected, the signal quality may deteriorate and video transmission may be interrupted. If you use an unshielded LAN cable, the unit may be damaged by static electricity charged on the cable.
*The transmission distance varies depending on the cable quality.
■ Operating temperature: 0-40℃
■ Operating humidity: 10 to 85% (no condensation)
■ Storage temperature: -20~60℃
■ Storage humidity: 10 to 85% (no condensation)
■ Power supply AC adapters
■ Current consumption 2A
■ SIZE:81.0(W)x93(D)x24(H)mm 300g (excluding AC adapter)
■ Accessories:
AC adapter
Plug (3 types)
RS-232 conversion cable (2m)
Ferrite core (3 pieces)
Instruction manual (including warranty)