IMAGENICS / CRO-HD13

1 input 3 distributor for digital signals compliant with HDMI (DVI) standards. HDCP (copyright protection) compatible. Can also be used as a distributor for DVI signals by cable conversion, etc.

■1 digital signal input 3-way distributor (HDMI (DVI) standard compliant)
■Video signal format
TMDS signal (digital RGB/YPbPr)
Pixel clock 25 MHz to 165 MHz (TMDS clock 25 MHz to 225 MHz)
Automatically supports HDMI signals equivalent to D1 to D5, as well as VGA@60 to UXGA@60, WUXGA@60 (RB), and PC signals of 2,048 x 1,152@60 (RB)
Supports HDMI signals up to 36-bit deep color signals or 24-bit full color DVI Rev1.0 standard compliant signals
■Digital input: 1 HDMI-A 19-pin connector (HDCP compatible, DVI signal input possible)
■Digital output: 1 HDMI-A 19-pin connector 3-way distributor
■Input cable compensation range: 1 m to 30 m HDMI made by our company With long cables

■Output pre-emphasis function: ON/OFF can be set for each output system (approx. +4 dB when set to ON)

*For system adjustment. Normally used at the default setting of OFF.

■EDID emulation function: Copy and use the EDID data of the OUT-1 connection, or select and use the built-in data

■Other functions: Display of various information on input/output status (can be turned ON/OFF with DIP SW)

Test pattern output function (resolution is the same as the EDID setting)

HDCP mode OFF function (when enabled, operates as HDCP incompatible with input devices)

■SIZE: 100 (W) x 25 (H) x 150 (D) mm (excluding protrusions) Approx. 550 g

■Accessories: AC 100 V 27 VA 50 Hz / 60 Hz Domestic use only AC adapter 1 unit (5 V 2.3 A output with lock mechanism) HDMI connector retaining bracket (CL-1) 4 units