IMAGENICS / CRO-HE25RX

This receiver can extend HDMI signals, RS-232C bidirectional communication, and 100BASE-TX Ethernet up to 150m over CAT5e/6 cable. It also supports WUXGA@60, 1080@60p, 4K30p, and 4K60p.

・Transmits HDMI (DVI-D) signals, bidirectional RS-232C signals, and 100BaseTX Ethernet digital signals over a single twisted pair cable.
・Supports 4K30p (4:4:4) and 4K60p (4:2:0). HDCP 1.4/2.2 compatible (pass-through).
・HDBaseT compatible.
・Maximum video delay of 10μs during 100m transmission.
・Equipped with status LEDs that indicate the connection status of the transmitter and receiver, and HDCP communication status.
・Compact, postcard-sized body with a rugged metal case.

■Extender (HDMI signal over CAT5e/6 cable, RS-232C bidirectional communication, 100BASE-TX Ethernet)
■4K Signaling: TMDS Clock: 25 MHz to 300 MHz, Pixel Clock: 25 MHz to 600 MHz, Data Rate: 0.75 to 9 Gbps, HDCP: 1.4/2.2, Supported Resolutions: 4K60p 4:2:0 24-bit, 4K30p 4:4:4 24-bit, etc.
■Video Output: HDMI Type A 19-pin connector (1x) TMDS Clock 25 MHz to 300 MHz
■CAT5e/6 Input: HDBaseT signal (1x) RJ-45
■RS-232C Input/Output: D-sub 9-pin male (1x) (Max. 115200 bps, TXD/RXD/CTS/RTS)
■LAN Input/Output: 1 RJ-45, 10BASE-T/100BASE-TX, Auto Negotiation, Auto MDI/MDI-X
■CAT5e/6 Transmission Distance: When using CAT-5e/6 STP. 150 m: When transmitting signals with a TMDS clock of 158 MHz or less and a data rate of 4.74 Gbps or less in long reach mode. 1080@60p (24-bit), WUXGA@60p (RB), etc. 100 m: Signals with a TMDS clock of 225 MHz or less and a data rate of 6.75 Gbps or less. 1080@60p (36-bit), UXGA@60p, etc. 70 m: Signals with a TMDS clock of 300 MHz or less and a data rate of 9 Gbps or less. Supports 4K@60p (4:2:0), 1080@60p (48-bit), etc.
■Video Delay: Maximum 10μs (when TX-RX distance is 100m)
■Power Supply: DC 5V 1.2A
■Size: 100(W) x 25(H) x 150(D)mm (excluding protrusions) Weight: Approx. 510g
■Accessories: AC 100V 27VA 50Hz/60Hz (Japan only) AC Adapter (5V 2.3A output with locking mechanism), HDMI Connector Locking Bracket (CL-1)
*HDCP and CEC are pass-through, but HEC and ARC are not supported.
*For CAT5e/6 cables, please use STP cables (recommended by the manufacturer for their resistance to electromagnetic waves and static electricity).
*HDCP for DVI signals is not supported.