TASCAM / ML-16D

Converts 16 channel analog line input / output signals to Dante in a compact 1U size. Also supports Dante redundant (Primary / Secondary). Equipped with D-sub terminal for analog line input / output. "ML-32D", which converts 32-channel analog line input / output signals to Dante, has been added to the lineup to meet a wide range of needs.

■ Specifications
・ Number of analog channels: 16 line input / 16 line output
・ Digital sampling rate: 44.1k / 48k / 88.2k / 96kHz
・ Bit length: 16bit / 24bit

■ Analog input / output
・ Line input
・ Connector: D-sub 25pin female
・ Connector: Inch type No.4-40 UNC
・ Pin assignment: TASCAM pin assignment according to AES59-2012
・ Nominal input level: + 4dBu, + 6dBu (only when maximum input level is + 15dBu)
・ Maximum input level: + 24dBu, + 22dBu, + 20dBu, + 18dBu, + 15dBu
* (Depending on the setting of the REF. LEVEL selector switch)
Input impedance: 10 kΩ or more

・ Line output
・ Connector: D-sub 25pin female
・ Connector: Inch type No.4-40 UNC
・ Pin assignment: TASCAM pin assignment according to AES59-2012
・ Output impedance: 200Ω or less
・ Compatible load impedance: 2 kΩ or more
・ Nominal output level: + 4dBu, + 6dBu (only when maximum output level is + 15dBu)
・ Maximum output level: + 24dBu, + 22dBu, + 20dBu, + 18dBu, + 15dBu
(Depending on the setting of the REF. LEVEL selector switch)

・ Digital input / output
・ Connector: RJ-45 x 2
・ Transmission protocol: Dante
・ Gigabit Ethernet standard: 1000BASE-T (IEEE 802.3ab)
・ Cable: Category 5e or higher STP cable

・ Power supply: AC100V, 50 / 60Hz
・ Power consumption: 14W
・ Dimensions: 483 (W) x 45 (H) x 303.8 (D) mm
・ Weight: 3.3kg
・ Operating temperature: 0-40? C
・ Accessories: Power cord, rack mount screw kit, instruction manual (with warranty)


[Performance]
● ANALOG IN → Dante OUT
Frequency characteristic
20 ~ 20k Hz: + 0.1dB / -0.5dB (-16dBFS input, Fs = 44.1k / 48k Hz, JEITA)
20-40k Hz: + 0.1dB / -0.5dB (-16dBFS input, Fs = 88.2k / 96k Hz, JEITA)
Distortion: 0.001% or less (-1dBFS input, 1kHz, Fs = 44.1k / 48k / 88.2k / 96k Hz, JEITA)
S / N ratio: 113dB or more (Fs = 44.1k / 48k / 88.2k / 96k Hz, JEITA)
Crosstalk: 115dB or more (1kHz, Fs = 44.1k / 48k / 88.2k / 96k Hz, JEITA)

* Dante is a transmission protocol developed by Audinate. It enables multi-channel transmission (512ch IN / 512ch OUT) and highly accurate clock synchronization in networks based on the Gigabit Ethernet standard.
For more information on Dante, please visit the Audinate website.
https://www.audinate.com/