FENDER / 001-9699-049

This is not a type with a sticker on the back, but is a type that is inserted into the PG. Please check once to see if your guitar/bass is noise-proof!

■Aluminum Shield Plate
■'62 Stratocaster Type
■Thickness: Approximately 0.5mm
*These are actual measurements taken by our company, not the manufacturer's published value. Also, since these measurements are taken from the package, please use them for reference only.

*Image is for illustrative purposes only.
*This is not a pickguard.

-----------------------------------
[Caution]
- The pickguard may have a protective film attached to its surface.
- The film may be difficult to remove. If this occurs, use a hair dryer to warm the surface while peeling off the film.
- If adhesive residue remains on the surface after removing the film, you can remove it with alcohol, an eraser, or hand cream.
-----------------------------------