ALLPARTS / PG-0995-055

Variations

This ALLPARTS guitar pickguard is designed for Stratocaster guitars with an S-S-H pickup arrangement. Its three-ply construction provides excellent cross-sectional design and rigidity.

■ Stratocaster Pickguard
■ SSH
■ Pearl Pattern

■ Dimensions
- Distance between humbucker mounting screws: Approx. 78mm
- Distance between single-coil mounting screws: Approx. 77mm

*These are actual measurements, not manufacturer-published values. Please use them for reference only.

-----------------------------------
[Caution]
- The pickguard may have a protective film attached to its surface.
- The film may be difficult to remove. If this occurs, use a hair dryer to warm the surface while peeling off the film.
- If adhesive remains on the surface after removing the film, you can remove it with alcohol, an eraser, or hand cream.
-----------------------------------