ALLPARTS / PG-0995-033

This ALLPARTS guitar pickguard is designed for Stratocaster guitars with an S-S-H pickup arrangement. Its three-ply construction provides excellent cross-sectional design and rigidity.

■ Stratocaster Pickguard
■ S-S-H
■ 11-hole
■ 3-ply (Black/White/Black)
■ Black

■ Dimensions
・Pull-up screw hole pitch: Approx. 78mm
・Pull-up hole size (humbucker): Approx. 69 x 38mm
・Pot hole: Approx. 9.5mm (inch standard)

*These are actual measurements taken by our company, not by the manufacturer. Also, since these measurements are taken from the packaging, please use them for reference only.

-----------------------------------
[Caution]
・The pickguard may have a protective film attached to its surface.
・The film may be difficult to remove. If this occurs, use a hair dryer to warm the surface while peeling off the film.
・If adhesive remains on the surface after removing the film, you can remove it with alcohol, an eraser, or hand cream.
-----------------------------------