ALLPARTS / PG-0107-023

ALLPARTS Pickguard Plate, Black, 10"" x 12"", .02"" Thick

■ Pickguard Plate
■ Adhesive Back
■ Black
■ 10"" x 12""
■ Thickness: 0.02""

-----------------------------------
[Caution]
- The pickguard may have a protective film attached to its surface.
- The film may be difficult to remove. If this occurs, use a hair dryer to warm the surface while peeling off the film.
- If adhesive remains on the surface after removing the film, you can remove it with alcohol, an eraser, or hand cream.
-----------------------------------