IMAGENICS / DM-C3

HDMIやDVIで映像システムを構築するときに必要なプラグアンドプレイ通信を補い、モニターなどの表示装置に代わって信号源との間で代替通信するプラグアンドプレイエミュレーターです。入出力コネクタにHDMIを採用。

■Plug-and-play emulator
■Input/output connector: HDMI Type A 19-pin connector (video signal is directly connected between input and output)
■EDID mode settings:

Preset modes: 1024 x 768, 1280 x 720 (D4), 1280 x 768, 1360 x 768, 1366 x 768, 1280 x 800, HDMI and DVI modes are selectable for each of the following primary resolutions: 1280 x 1024, 1400 x 1050, 1440 x 900, 1600 x 900 (RB), 1680 x 1050, 1600 x 1200, 1920 x 1080i (D3), 1920 x 1080p (D5), and 1920 x 1200 (RB), for a total of 30 resolutions. It also reads and stores the EDID of plug-and-play compatible monitors and uses that data. (Note: D3, D4, and D5 are compliant with the CEA-861 HD signal timing standard; RB is compliant with the VESA DMT Reduced Blanking timing standard; all other resolutions are VESA (DMT standard timing compliant)
■ Power: DDC power supply from video input terminal or USB bus power (Mini USB Type B 5-pin connector)
■ Maximum current consumption: 100 mA (DC 5 V)
■ Approx. 150g
■ Dimensions: 70 mm W x 23 mm H x 65 mm D (excluding protrusions)
■ Accessories:
- HDMI cable (High Speed HDMI Cable with Ethernet) 1 m x 1
- HDMI cable retaining clips (CL-1) x 2
- Cable ties x 2