This motor is ideal for mirror balls of 20 and 30 cm in diameter. It has a chain so if there is a key ring on the top of the mirror ball, it is easy to install. The attached screws may not have sufficient strength depending on the installation location, so please prepare suitable screws at hardware store, etc.
A mirror ball whose body is made of resin and about 1 cm square mirrors covers around. The diameter is 30cm and it is active in various scenes such as home parties, events, shop decorations, etc.
LED pin spot compatible with DMX512. Equipped with 8W RGBW 4-in-1 Quad LED, it emits a 15 degree beam. Optional UCIR infrared remote control available. Small and lightweight, ideal as a mirror ball spot.
The Eliminator Lighting Aqua LED 2 is a multi-colored simulated water flowing effect with a white 50W COB LED source. It features two operational modes: seamless scrolling colors or single-color operation:
A set of 30cm diameter mirror ball, motor (1-2 rotations / min), and LED pin spotlight. The mirror ball is suspended and the motor is fixed to the ceiling or beams with screws or wires.