This motor is ideal for mirror balls of 20 and 30 cm in diameter. It has a chain so if there is a key ring on the top of the mirror ball, it is easy to install. The attached screws may not have sufficient strength depending on the installation location, so please prepare suitable screws at hardware store, etc.
A mirror ball whose body is made of resin and about 1 cm square mirrors covers around. The diameter is 30cm and it is active in various scenes such as home parties, events, shop decorations, etc.
LED pin spot compatible with DMX512. Equipped with 8W RGBW 4-in-1 Quad LED, it emits a 15 degree beam. Optional UCIR infrared remote control available. Small and lightweight, ideal as a mirror ball spot.
A set of 30cm diameter mirror ball, motor (1-2 rotations / min), and LED pin spotlight. The mirror ball is suspended and the motor is fixed to the ceiling or beams with screws or wires.
LED pin spot with 15W warm white LED. Equipped with an ACL lens, which produces a sharp beam. Dimming can be adjusted between 0-100% . Ideal for mirror ball pin spot.
This motor is ideal for mirror balls of 40 and 50 cm in diameter. You can easily install the effect function in your room because you only need to plug the power cable into the outlet. Screws are not included, so please get screws with sufficient strength at hardware store, etc.