ROLAND / S-1608

■ Digital Snake Unit

・Simultaneously transmits 16 channel inputs + 8 channel outputs.
・REAC is adopted for digital transmission. Transmission is possible with a general-purpose CAT5 cable.
・Low latency, 24-bit/96kHz high-quality sound transmission.
・Floor type that is easy to use on the stage. Rack mountable (rack mount bracket included)
・Equipped with high-quality, low-noise remote head amplifier for all input channels
・All inputs use a high-quality head amp with phantom power. It can be set comfortably with the dedicated remote controller S-4000R (sold separately).

■ Specification

・AD/DA conversion: sample rate 96KHz, bit rate 24bit
・Number of channels: 16ch XLR inputs, 8ch XLR outputs
・DIGITAL OUT: Optical type
・REAC connector: RJ-45 EtherCon type
・Remote connector: RS-232C, 9-pin D-sub type
・Frequency characteristics: -2dB / + 0dB (@ + 4dBu, 20Hz-20kHz)
・Total harmonic distortion: 0.05% or less (Pad: On, Input Gain: +4 dBu, 22 to 20kHz)
・Dynamic range: 100dB
・Crosstalk: -80dB or less (Input Gain: + 4dBu, typ.)
・Input impedance: 14kΩ
・Regulated output level: + 4dBu fixed (maximum + 22dBu)
・Output impedance: 600Ω
・Recommended load impedance: 10kΩ or more
・Residual noise level (IHF-A, typ.): -80dBu or less
・Equivalent input noise level (E.I.N.): -128dB
・Network delay time: 375μs (AD → REAC → DA delay time: about 1.2ms)
* Delay occurs due to passing through the REAC splitter S-4000-SP. (Maximum 0.2mSec)
・Power supply: AC100V (50 / 60Hz)
・Power consumption: 45W
・Phantom power: + 48V / 14mA (each input channel, remote control possible)
・Dimensions: 401 (W) x135 (D) x177 (H)
・Mass: 5.5Kg