This vocal microphone can control TC-Helicon effects (compatible with supported devices). Its four built-in buttons allow you to switch presets and more, allowing singers to freely change their voice while moving around on stage.
■Dynamic Microphone
■Directivity: Supercardioid
■Frequency Response: 50Hz-18kHz
■Output Impedance: 300Ω
■Sensitivity: -54dBV/Pa (1.99mV) -1Pa = 94dB SPL@1kHz
■Connector: XLR 3-pin (male)
■Size/Weight: Diameter 50mm, Length 185mm, 290g
■Accessories: Dedicated soft case & microphone stand clip (compatible with 3/8-inch and 5/8-inch screws)
~From the manufacturer's website~
The MP-76 is a unique microphone concept, featuring four buttons that allow singers to flexibly control their voice while moving around the stage.
Not only does it have a control panel, but it also has a built-in LCD display, allowing you to keep track of your equipment's status at all times without even having to turn around to look at it.
Of course, it also offers excellent basic vocal microphone performance. Built to withstand the harsh conditions of the stage, the MP-76 delivers vocal-optimized performance and high feedback resistance.
More is better - 4-button configuration
The MP-76's four buttons allow for operations such as ""preset up/down."" Operation is completely unconscious, just like using a familiar home appliance remote control or the crosshair cursor on a cell phone.
Each button can be assigned a function tailored to the singer's preferences. Various options are available depending on the vocal processor you use.
Visual feedback
The MP-76 is equipped with an LCD display. Instantly check the preset number of the connected vocal processor and the on/off status of the HIT function.
Battery-free
These additional functions are powered by phantom power from the vocal processor, so no batteries are required. This not only eliminates one potential source of trouble, but is also an eco-friendly design. Simply use a standard XLR microphone cable. - Feedback Resistance
Equipped with a wide-range, high-output Lismer dynamic capsule with a supercardioid polar pattern. The Lismer capsule boasts best-in-class off-axis feedback resistance. The diaphragm also features a dual-material construction with a lightweight and rigid section to optimize high-frequency response.
- 50 Hz to 18 kHz operating frequency range
- High output thanks to a patented neodymium magnet structure
- Internally suspended dual shock mount
- Includes a dedicated soft case and mic stand clip
■ Compatible Models
To use the MP-76's features, you must connect it to a compatible TC-Helicon voice processor. Compatible products are listed below.
●Products that support 4-button operation
・VoiceLive 3
・VoiceLive Touch 2
・VoiceLive Play
・Play Acoustic
・Play Electric
・VoiceSolo FX150
●Products that support center button (1-button) operation
・VoiceLive 2
・VoiceLive Touch
・VoiceLive Rack
・VoiceTone Create XT
・VoiceTone Correct XT
・VoiceTone Synth
・VoiceTone Harmony-G XT
・VoiceTone Harmony-M
* To use the MP-76, you must configure each product's setup screen. Please refer to the MP-76 manual for details.
関連商品
スタッフレビュー
TC-Heliconの対応エフェクターを、手元でコントロールできるボーカル・マイクです。「VoiceLive Touch 2」との組み合わせで試してみましたが、手元でプリセットの切り替えが行えるのは魅力的です。ステージを自由に動きながら、曲の中でエフェクトを自由に切り替えることができます。マイク自体も重いという事もありません(実際、SHURE SM58より若干軽い)。接続は、一般的なXLRマイクケーブルでTC-Heliconの対応エフェクターと繋ぐだけです。いろいろなボーカル・エフェクターを使ってみたいが、パフォーマンスも妥協したくないボーカリストにオススメのマイクです。

サウンドハウススタッフ
商品レビューProduct Review
すべてのレビューを見る