SPECIAL SELECTION
AC-CETERA Special Feature

AC-CETERA Special Feature

Vertical-horizontal clamp

Clamp-type microphone holder that can be mounted on the drum rim and save space. Clip-type clamps are compatible with various microphones. Secure the clamp with a nut.

Vertical-Bidirectional

Attached to the support of the snare stand, it is ideal for snare bottom miking. Also attach the microphone in a stacked form, also recommended when picking up instruments such as piano and ambient sound with different microphones.

PIGEBAK

Clamp type microphone holder (female)

Clip-type microphone holder that can be attached to a microphone stand. It can cope with various microphones and the clip can be fixed firmly into place with a nut. In addition, you can freely set the microphone position by combining the R16S rubber neck.

Clamp type microphone holder (male)

Because it is a male screw, it is possible to attach your microphone holder. Mic position can be adjusted freely by combining the R16S rubber neck, and can be extended.

Clamp type gooseneck (male)

As it is a male screw, you can attach your microphone holder as a microphone arm clamp. Goosenecks can be selected from 12.5 & 7.5 cm in length, and mounting methods can be selected from horizontal & vertical mounting.

Smart phone holder

Compatible with smartphones of various sizes, vertical & horizontal adjustment is possible. The clip-type clamps can be used with various sizes of columns and can be securely fixed with nuts. In addition, it can be installed on the holder attachment of microphone stands.

EZ01

Other clamps can be used in combination. Use M2 or M4 as a mounting clamp respectively. You can also extend the gooseneck. You can expand the width of the mic settings for drums and mic arms.

M1 - M2 or M4 with R16S
M1A - M2 or M4 with R16S

M1AE3 - M2 or M4
M1AE5 - M2 or M4

M1E3 - M2 or M4
M3 - M2 or M4 with R16S

M3E3 - M2 or M4
M3E5 - M2 or M4

Horizontal mounting M1, M2
For vertical mounting M1A, M3, M4