Booth displays

It has a rectangular top and four pillars. It is used for general exhibition booths and stage applications as well as squares. The following set examples are the most basic examples. Please feel free to contact us from basic matters to complicated trusses.

■ Square truss 400W x 300D x 250H cm

Triangular truss 400W x 300D x 250H cm

The top is X-shaped, and it has a shape with four columns. The difference from the square type is that beams can be placed on the ceiling to increase the degree of freedom in the installation position of lighting equipment such as spotlights.

■ Square truss 350W x 350D x 300H cm

▲ Triangular trusses 350W x 350D x 300H cm

It is a cross truss shaped like a cruciform erected from four pillars. Because the truss is raised at the top like a dome, it can cover almost all directions for installation of lighting equipment.

■ Square truss 450W x 450D x 350H cm

The upper part is shaped with two squares, and it has a shape with four columns. A form that adds one beam to a rectangular solid shape, and lighting equipment can be installed in the center.

■ Square truss 350W × 650D × 250H cm

▲ Triangular trusses 350W x 650D x 250H cm

U-shaped with bases (feet) attached to increase stability. In addition to being able to suspend lighting equipment and illumination, and are ideal as entrance gates for school festivals and exhibitions or for hanging banners and billboards.

■ Square truss 300W x 300H x 150D cm

■ 10 cm wide square trusses 320W × 310H × 110D cm