About intellistage

[1] Open the riser and insert the bracket at the top of the riser into the hole on the back of the platform.

[2] Using an L-shaped hexagonal wrench attached to the side of the platform, turn the hexagonal screw on the top of the platform about 90 degrees and secure.

Load capacity

900 kg per 1 m square (900 kg/m2)

Linking platforms

Insert the bracket on the side of the platform into the groove on the side of the platform you want to connect, and secure it by turning the screw at the top of the side bracket with a hex wrench.

Stacking risers

It is possible to stack risers up to two stages.