On board with most major equipmentd
[Reference]
Types of mixers
Connection method
- Connect using an XLR male-female cable.
[Reference] Cable course
?(In most cases, the cause of there being no output from a condenser microphone is that the wrong cable, an XLR female-phone, is being used)
- If there is a phantom dedicated ON / OFF switch, press the button labeled "+ 48V etc."
Important point
- When turning on / off phantom power, turn on / off the gain and fader on the mixer side.
- After turning phantom power off, do not disconnect the cable immediately because there is voltage remaining on the capacitor.