How to choose DMX controller-par light

HELP
S Point

Lessons for Beginners
Lighting Course
How to choose DMX controller-par light

The number of DMX channels and the number of faders (sliding up and down) for each device are important points! It is important how to assign lighting equipment to DMX channels for control.

Example) When there are multiple units of the same lighting equipment using 3 DMX channels

If you want to control each light individually:
Set the address to channel 1 for the first unit and channel 4 for the second unit.
When you want to control multiple units with the same operation:
Set the address for all lighting devices on the same channel.

[Reference] Channel setting by dip switch

When controlling a bulb type of par light

Select the dimming unit (dimmer) based on the number of required par lights and the number of bulbs used. Small light control unit can be connected directly with a parallel outlet, but large, high power control types require wiring processing for terminal connections.
In that case, the DMX controller with more than the number of DMX channels required for the light control unit to be used is needed.

Connection example

We recommend a controller with a large number of par light oriented faders as a par light DMX controller. Connect the DMX unit to the DMX controller using the prepared DMX unit and DMX cable ( 5-pin / 3-pin ) compatible with the DMX controller.
[Reference] DMX Cable