ここから本文です

HOME

Type of guitar


String replacement -strat type-

Loosen the strings.

Loosen the strings.

Cut the strings with wire cutters.

Cut the strings with wire cutters.

Remove the strings.

Remove the strings.

Pass the new string through the bridge.

Pass the new string through the bridge.

Cut the string by using the peg post two points ahead of the peg post actually attached as a guideline.

Cut the string by using the peg post two points ahead of the peg post actually attached as a guideline.

Insert the cut tip into the peg post hole.

Insert the cut tip into the peg post hole.

Rewind the string while holding the tip of the string in place.

Rewind the string while holding the tip of the string in place.

Stretch the strings.

Stretch the strings.

Start tuning.

Start tuning.
[Reference] How to tune a guitar


String replacement -Les Paul type ~

Loosen the strings.

Loosen the strings.

Cut the strings with wire cutting nippers.

Cut the strings with wire cutting nippers.

Remove the strings.

Remove the strings.
※ Because the bridge will come off with the tune-o-matic,
be careful not to damage the body.

Pass the new string through the bridge and through the peg post hole.

Pass the new string through the bridge and through the peg post hole.

Allow some room for the strings and make creases before winding.

Allow some room for the strings and make creases before winding.

Wind the strings from inside to outside.

Wind the strings from inside to outside.
※ Be careful not to wind in the opposite direction.

Stretch the strings.

Stretch the strings.

Cut the excess strings.

Start tuning.

Start tuning.
[Reference] How to tune a guitar


String replacement ~ Floyd Rose Type ~

Remove the lock nut cap.

Remove the lock nut cap.

弦を緩めます。

Loosen the strings.

[Point] Do not remove all the strings at once, but change them one by one.

Cut the strings with wire cutters.

Cut the strings with wire cutters.

アームダウンの状態にし、ブリッジ部を浮かせてストリングロックスクリューを緩めて弦を取り外します。

With the arm down, lift the bridge and loosen the string lock screw to remove the strings.

Take a new string and cut the ball end.

Take a new string and cut the ball end.
Plain strings are generally cut at the end of the ball end so as to remove the twisted section of the string.

Fix the cut strings in the saddle with the insert string lock screw.

Fix the cut strings in the saddle with the insert string lock screw.

Pass the string through the peg post and wind the string while holding the tip of the string in place.

Pass the string through the peg post and wind the string while holding the tip of the string in place.

Start tuning.

Start tuning.
[Reference] How to tune a guitar

Fix the lock nuts.

Fix the lock nuts.

If tuning is not correct, make final adjustments with the fine tuner.

If tuning is not correct, make final adjustments with the fine tuner.


Categories

CLASSIC PRO / Alkaline Battery
ブランドから探す
FACEBOOKLINEYouTubeTwitterInstagram
SOUND HOUSE Official LINE

Page Top