ここから本文です

HOME

Types of pickups for electric guitars

Pickup types

Electric guitar pickups, based on the structure, can be divided into two types: single-coil pickups and humbucking pickups (humbucker). In addition it is also possible to classify them by active pickups that require a battery and a passive pickups that does need a battery.

Single-coil pickup

Single-coil pickup

As the name suggests, it refers to a pickup which consists of a single coil. Mainly used in FENDER-type guitars such as the Stratocaster and the Telecaster, and provide rich overtones, and bright, sharp sound. The P-90 pickup used in the GIBSON Les Paul Special is also classified as a single coil. As the distance between the pole pieces and the (magnet) coil is close, there is a tendency to pick up a good high-frequency, so the pickups on Stratocasters & Telecasters have a mellow high range, while the P-90 will be more of a thick sound .

Stack single coil

Suppresses the noise of the humbucking structure by stacking two coils on top of each other, resulting a single coil model sound. There are many high-output models that are used for blues to heavy metal. In terms fo structure, because high frequencies tend to attenuate compared to normal single coil pickups, some manufacturers recommend a pot of 500k Ohm in order to balance it out.

KINMAN STRINGS
BLUES SETKINMAN / BLUES SET

Humbucker pickups

Humbucker pickupsHumbucker pickups

A pickup that can increase the output by using two coils and cancels the noise (hum cancellation). In the old days, it was developed by Gibson engineer Seth Lover and others, and the pickup, commonly known as PAF (Patent Applied For), mounted on the vintage Les Paul is still one of the standards for guitar sound. Due to its structure, the high-frequency characteristics are inferior to single coils, but it is a popular pickup because it gives a thick sound with emphasis on the mid-low range. There is also a lineup of single-size humbuckers that can get the sound of a humbucker without having to perform any major processing, even on guitars with a single coil such as a stratocaster.

Active pickups

Active pickups

A pickup that requires an external power supply, such as a battery to drive it, is called an active pickup. A large output is obtained and there is little noise. Therefore, it tends to be preferred by guitarists who use high gain amplifiers, such as hard rock and heavy metal guitarists. Sound House offers a wide range of models from EMG, the leading manufacturer of active pickups, to the FISHMAN / Fluence series, which employs an advanced structure without coils.

How to install and replace?

When installing or replacing pickups, soldering is usually required. Wiring methods differ depending on the manufacturer of the pickup and the controls on the guitar, so if you are uneasy, we recommend that you ask a musical instrument store or repair shop to install it. Please refer here when wiring by yourself.

Wiring of parts

Categories

Search by Brand

Brand List
FACEBOOK LINE YouTube X Instagram TikTok