■ Digital Snake Unit
・8 channels (FOH→STAGE) +16 channels (STAGE→FOH) transmitted simultaneously
・REAC is adopted for digital transmission. Can transmit with a general-purpose CAT5 cable.
・Low latency, 24-bit/96kHz high-quality sound transmission.
・Easy branching and extension.
・Floor type that is easy to use on the stage. Rack mounting is also available with the included parts.
・Equipped with high-quality, low-noise remote head amplifier for all input channels.
・All inputs use a high-quality head amp with phantom power. It can be set comfortably with the dedicated remote controller S-4000R (sold separately).
・ AD/DA conversion: sample rate 96KHz, bit rate 24bit
・Number of channels: 8ch XLR input, 16ch XLR output
・DIGITAL OUT: Optical type
・REAC connector: RJ-45 EtherCon type
・Remote connector: RS-232C, 9-pin D-sub type
・Frequency characteristics: -2dB/+0dB (@ +4dBu, 20Hz-20kHz)
・Total harmonic distortion: 0.05% or less (Pad: On, Input Gain: +4 dBu, 22 to 20kHz)
・Dynamic range: 110dB
・Crosstalk: -80dB or less (Input Gain: +4dBu, typ.)
・Input impedance: 14kΩ
・Regulated output level: +4dBu fixed (maximum +22dBu)
・Output impedance: 600Ω
・Recommended load impedance: 10kΩ or more
・Residual noise level (IHF-A, typ.): -80dBu or less
・Equivalent input noise level (E.I.N.): -128dB
・Network delay time: 375μs (AD→REAC→DA delay time: about 1.2ms)
* Delay occurs due to passing through the REAC splitter S-4000-SP. (Maximum 0.2mSec)
・Power supply: AC100V (50/60Hz)
・Power consumption: 45W
・Phantom power: +48V/14mA (each input channel, remote control possible)
・Dimensions: 40.1 (W) x13.5 (D) x17.7 (H) cm
レビューを投稿するWrite a Review